- Tel:0086-0523-87360106
- Cel:0086-18914408040 /13914429808
- E-mail:2370108759@qq.com
- Add:Heshi Town Industrial Zone, Taixing City, Jiangsu Province
Two methods of distinguishing webbing materials: touch and combustion
First, the touch method:
1. Nylon is also a nylon material. The webbing is soft, smooth, bright in color, good in gloss and light in material.
2. The webbing of polypropylene (PP) material is hard, rough and has poor gloss;
3, polyester material ribbon color is relatively rigid, but the color fastness is good, the proportion is heavier;
4, polyester short-staple (also known as polyester civilian silk, commonly known as polyester-cotton) polyester fiber silk fabric feels similar to the cotton material, soft to the touch.
Second, the combustion method: use the fire to ignite the ribbon, observe the state of the burning flame, smell the smell of the ribbon after burning, look at the remaining after burning, and then judge the material of the ribbon.
1, vinylon and polyvinyl chloride
The name of vinylon is not easy to ignite, the near flame melts and shrinks, and there is a little flame at the top when burning. When the fiber melts into a gelatinous flame, it has a thick black smoke, a bitter smell, and black after burning. Bead-like particles that can be crushed with your fingers. Polyvinyl chloride fiber, difficult to burn, is extinguished from the fire, the flame is yellow, the lower end of the green white smoke, the pungent pungent smell of spicy and sour, after burning, the ash is dark brown irregular lumps, the fingers are not easy to smash.
Second, acrylic and polypropylene (PP)
Acrylic fiber name polyacrylonitrile fiber, near fire softening and melting, black smoke after the fire, the flame is white, burning quickly after the flame, emitting the bitter smell of the fire meat, after burning the ash is irregular black lumps, handcuffs are brittle . Polypropylene fiber, polypropylene fiber, near the flame is melted, flammable, burning slowly from the fire and black smoke, the upper end of the flame is yellow, the lower end is blue, emitting oily smell, after burning, the ash is hard round light yellow brown granules, hand 捻 easy broken.
Third, spandex and fluorocarbon
Polyurethane, the name of spandex fiber, burns near the edge of the fire. When burning, the flame is blue. It leaves the fire and continues to melt, giving off a special irritating odor. After burning, the ash is soft and fluffy black ash. Fluorine fiber PTFE fiber, ISO organization called it fluorite fiber, near flame only melt, difficult to ignite, not burning, edge flame is blue-green carbonization, melting and decomposition, gas is toxic, the melt is hard round black Beads. Fluorinated fibers are commonly used in the textile industry to make high performance sewing threads. It is easy to identify fibers by combustion, but blended products are not easy to judge. A yarn is drawn from each of the warp and weft directions (ie, the direction of the straight and the horizontal).
Fourth, cotton fiber and hemp fiber
Both cotton fiber and hemp fiber are burning near the flame, burning rapidly, the flame is yellow, and blue smoke is emitted. The difference between the two smells of burning and the ash after burning is that the cotton burns to emit a paper smell, and the hemp burns to give off the ash smell of grass; after burning, the cotton has very little powder ash, which is black or gray, and the hemp produces a small amount of grayish white powder ash.
Five, nylon and polyester
Polyamide (nylon), the name of the polyamide fiber, is rapidly curled into a white gel in the near flame. It melts and blisters in the flame. There is no flame when burning. It is difficult to continue burning after leaving the flame, and it emits celery flavor. After cooling, The light brown melt is not easily broken.
Polyester fiber name is easy to ignite, and it is melted near the flame. When burning, it emits black smoke when it melts. It has a yellow flame and emits an aromatic odor. After burning, the ash is a dark brown block and can be broken with fingers.
Ribbon refers to the use of various yarns as raw materials to make narrow-width fabrics or tubular fabrics. It is widely used in various industrial sectors such as clothing, shoe materials, luggage, industry, agriculture, military demand, transportation and so on.
Taixing Hongyang New Material Technology Co., Ltd. now has 6 drawing machines, 10 webbing machines and nearly 100 air-changing machines. The polyester yarns produced by the company have stable quality, fast delivery and are exported to South Korea, South Africa, etc. country. Taixing Hongyang mainly develops, produces and sells: polypropylene high-strength yarn, polypropylene air-changing yarn, polyester air-changing silk, ribbon, etc. With its superior quality and good reputation, it has won unanimous praise from customers!
For more product information, please contact: Liu Xuelian 18914408040 Website: http://m.lnxnc.cn/
- The textile industry is writing a new chapter in the tide of The Times
- Polyester air change yarn has a natural appearance with an irregular surface top
- The fifth and fourth Council of the Middle Class Interlining Material Branch was held in Jiaxing
- Why is polypropylene high strength silk milk corrosion resistant
- Solidly promote the gathering and upgrading of textile finishing industry
- Why is the structure of high strength polypropylene filament stable?
- Textile and garment industry trusted data space officially launched
- The strength of polypropylene high strength yarn is affected by production process factors Spinning
- The development of textile and garment industry is strong and powerful
- Application of polypropylene high strength filament in textiles
- Contact Us
- Unified Service Hotline: 0086-0523-87367699
- All rights reserved Taixing Hongyang New Material Technology Co., Ltd.
Technical Support::China polypropylene network